Emulsion SS2

We are instrumental in offering a wide range of SS 2 Cationic Bitumen Emulsion that is mainly used for road construction. This chemical is processed using supreme class chemicals and latest technology by keeping in mind industry standard. In order to deliver flawless to our clients, our offered chemical is tested on various predefined standards of the industry. The entire range is available in different packaging options at highly competitive prices.

Features:

Penetrate the cracks & crevices and impart strength to the layers
Bonds well to cool, damp substrates/surfaces
Good penetration into miniature pores of sub bases
Low temperature curing
Extended breaking
Easy spray
Prevents permeability of atmospheric air to the bottom layer
High adhesive properties
Binds loose aggregates together strongly
Water resistant and enhances easy drainage of water
Prevents lateral movement of structural layers
Prevents raveling and rutting

Applications:

Prime Coat: Application of RATNAMANI SS-2 to an absorptive surface, designed to penetrate, bond and stabilize this existing surface and to promote adhesion between it and the construction course that follows. Recommended rate of application is 6 to 9 kg per 10 sq. m.

Fog Seal / Crack Seal: Light application of RATNAMANI SS-2 to an existing pavement as a seal to inhibit raveling, or to seal the surface, or both. Also used to fill and seal small cracks in existing pavements. Fog seal helps to rejuvenate an old oxidized road surface, thus extending its life. Recommended rate of application is 5 to 10 kg per 10 sq. m.

Slurry Seal: It is a surface treatment for structurally sound roads where the wearing course has deteriorated. Slurry seals are mixtures of fine aggregate, Portland cement filler, bitumen emulsions and additional water. When freshly mixed, they have thick consistency & can be sprayed to a thickness of 1.5 - 5 mm. They may be used to seal cracks, arrest fretting and fill voids and minor depressions. Recommended rate of application is 10 to 12 kg per 10 sq. m.

Premix Seal Coat: Premix is a mixture of fine aggregate, Portland cement filler, bitumen emulsions and additional water. They may be used to seal wide cracks, fill voids and minor depressions. Recommended rate of application is 10 to 12 kg per 10 sq. m.

Specifications:

Characteristics	-
Residue on 600 micron IS Sieve, percent by mass, Max	0.05
Viscosity by saybolt furol viscometer, seconds 1) At 25℃ 2) At 50℃	30-150 -
Coagulation of emulsion at low temperature1)	Nil
Storage stability after 24 h, percent, Max	2
Particle charge	Positive
Coating ability and water resistance: 1) Coating, dry aggregate 2) Coating, after spraying 3) Coating, wet aggregate 4) Coating, after spraying	-
Stability to mixing with cement (% coagulation), Max	2
Miscibility with water	No Coagulation
Tests on residue: 1) Residue by evaporation, percent, Min 2) Penetration 25℃/100g/5 sec 3) Ductility 27℃/cm, Min 4) Solubility I tricholoethylne, percent by mass, Min	60 60-120 50 98
Distillation in percent volume of distillate recovered at 360℃ at 1) 190℃ 2) 225℃ 3) 260℃ 4) 316℃ 5) Residue at 360℃, percent, Min	-
Water content, percent by mass, Max	-

1) This requirement shall be applicable only under situations where the ambient temperature is below 15℃.
2) The value of solubility is determined on distillation residue at 360℃