Emulsion RS 1

Emulsion RS 1 that is suitable as binder for penetration macadam and sand seal. This chemical is processed using supreme class chemical compounds as per the set industry norm under utmost favorable condition. We assure our clients that offered chemical is sternly monitored on various parameters to ensure their quality. Further, we offer this chemical in various colors to meet the exact needs and requirements of the clients.

Features:

Good penetration into miniature pores of sub bases
Easy spray
Extended breaking

Specifications:

Characteristics	-
Residue on 600 micron IS Sieve, percent by mass, Max	0.05
Viscosity by saybolt furol viscometer, seconds 1) At 25℃ 2) At 50℃	- 20-100
Coagulation of emulsion at low temperature1)	Nil
Storage stability after 24 h, percent, Max	2
Particle charge	Positive
Coating ability and water resistance: 1) Coating, dry aggregate 2) Coating, after spraying 3) Coating, wet aggregate 4) Coating, after spraying	-
Stability to mixing with cement (% coagulation), Max	-
Miscibility with water	No Coagulation
Tests on residue: 1) Residue by evaporation, percent, Min 2) Penetration 25℃/100g/5 sec 3) Ductility 27℃/cm, Min 4) Solubility I tricholoethylne, percent by mass, Min	60 80-150 50 98
Distillation in percent volume of distillate recovered at 360℃ at 1) 190℃ 2) 225℃ 3) 260℃ 4) 316℃ 5) Residue at 360℃, percent, Min	-
Water content, percent by mass, Max	-

1) This requirement shall be applicable only under situations where the ambient temperature is below 15℃.
2) The value of solubility is determined on distillation residue at 360℃